Economic analysis of utilizing Kainji gas kiln for fish smoking in the Kainji Lake Basin of Nigeria

Marketing of smoked fish in the Kainji Lake Basin (Nigeria) has been found to be complex, traditional and inefficient. It is also said to be limited in scope due to poor handling and processing techniques, lack of storage facilities and inadequate marketing informations. The invention of Kainji gas kiln has been found suitable to overcoming poor handling and processing techniques. This paper discusses the feasibility of operating Kainji gas kiln commercially supported with adequate storage facilities and competent management hands. The financial indicators of net present value (NPV), 47,481.11, Internal rate of return (IRR) 24% and payback period of 2.3 years that are calculated confirmed that the commercial use of Kainji gas kiln is indeed profitably feasible

Construction, extension and evaluation of the improved smoking kiln (Banda) in Kainji Lake area

Fish smoking, as a traditional occupation of fishermen and women in Kainji Lake Area (Nigeria) is done using simple traditional ovens called 'Banda', the fuel for the smoking being almost hundred percent dependent on wood. A simple modification was made to the traditional 'Banda' oven using a damper to prevent burning of the fish. A comparison of the improved and the traditional 'Banda' was made. The results indicate that fuel wood consumption was reduced 52 percent by using the improved 'Banda', which implied that 50 percent of fish processor's income could be saved through the adoption of this technology. The most important advantage of the improved kiln, fuel wood conservation, represents for fishers a problem of an economic importance. Whilst they are aware that it is becoming much more difficult to get the needed fuel wood, the children can still conveniently collect enough wood for both home use and processing activities. The cost of the components of the improved kiln, when compared with the traditional version may be considered quite significant, and hence the reluctance of the fish processors in constructing similar ones. Selected blacksmiths were trained to continue the fabrication of the kiln component. The training was carried out to assure that the improved kiln will be constructed even after the project will end to support the fabrication

Studies on smoking of eel fillets

A procedure has been worked out to (hot) smoke eel fillets. Some of the important factors such as size of the fillets, brining, pre-drying, source of smoke, smoking period, final drying have been studied. Best quality of smoked product is obtained on smoking eel fillets with a mixture of coconut-husk and sag saw-dust in 1:1 proportion for 15 hours. Optimum moisture level of the final product was fixed in the range of 30 to 35% and it had a storage life of about 8 months at room temperature.

A review on oil sardine 2. Preservation by canning, curing and smoking

Commercial canning of oil sardine (Sardinella longiceps) in India is a relatively new procedure. Although 7 firms are engaged in canning this compares poorly with the abundance of the fish. There are often wide variations in the quality of the canned fish and important chemical and physical variations occur in the product once canned. A description of the canning process is given, and production figures compared to those of other countries. Production figures for 1965 to 1969 are given. These show that production increased from 1.2 to 1.5 million cans, but that there was a peak in 1967 when 3.2 million can s were produced. Exports of canned marine fish by country, and production of caned sardine by country from 1965 to 1970 are tabulated. The types of containers used and the feasibility of exporting canned fish are considered. Finally, the preparation of cured and smoked products is discussed briefly.

The Gjerstad kiln: a combined hot and cold smoking kiln

A combined hot and cold smoking kiln has been constructed for use at Lake Turkana, Kenya. Used for cold smoking, the kiln's main advantages over the traditional kilns used in this area are its greater smoking capacity and lower firewood consumption. Having the option of using the same smoke house for cold and hot smoking reduces the total construction costs for an operator producing both types of smoke cured product. The hot smoking process was found to require markedly less firewood than cold smoking, a fact of considerable importance in desert or semi-desert areas with sparse vegetation.

Smoking of shrimp and fish from coastal village of north-west Bangladesh

Traditional smoking of mixed shrimp species is a method of preservation in coastal region of Bangladesh. Besides traditional smoked shrimp, attempt had been made to produce smoked shrimp from brown shrimp, Metapenaeus monoceros and fish from mugil, Liza parsia and the quality of smoked product was found good very on the basis of physical properties, proximate composition and mineral contents of the products.

How to construct a fish smoking kiln

As interest increases in fish production, fish farming is on the rise as more fish is produced in ponds, cages and tanks. However not all fish can be sold out and consumed at the same time, in addition to this, different consumers show different preference. Some individua Is tend to prefer smoked fish to fresh and fried fish. Apart from satisfying the different consumer preferences, fish smoking is important because it in creases the self life of fish, there by reducing post harvest losses. It also adds value to the fish and in this way the farmer can fetch more money from farmed products. Although the technology has been around for several years amongst the fishing communities, it is not well known amongst fish farmers. There is need to bring fish fanners on board to know how to construct the smoking kiln through the stapes out lined below.

Improved cement block fish smoking kiln

The kiln described below is based on a portable sheet steel kiln designed by Beny in 1964. Improvement of quality of the final product, increased operating efficiency and reduction in firewood consumption were the reasons prompting the design. The design discussed was evolved by the author after a number of experimental prototypes were built, in order to reduce first cost and heat losses, both high with the all-steel kiln. Traditionally, a simple pit and table is used, around the shures of Lake Kyoga, for smoking fish.

Veränderungen der Farbe und thermischen Stabilität der Muskelproteine von Räucherforellen während der Kühllagerung

The aim of the investigation was to prove if different farming conditions like conventional and organical farming of rainbow trout may cause differences in quality which are detectable by physical methods such as colour measurement and differential scanning calorimetry. Colour measurement revealed remarkable differences in lightness. Smoked trouts originating from conventionally farmed fish were much lighter than those of organically farmed trouts. This difference in L* could already be found when colour measurements were taken on the raw material. However, during chilled storage differences were equalized. Redness and yellowness were not significantly influenced by farming and did not change remarkably during chill storage. Based on earlier investigations on changes in thermal stability caused by heating, DSC curves of smoked trout could be used to verify that the core temperature of smoked fish had reached at least 60 °C during hot smoking process. This temperature is demanded by the guidelines of the German Food Code. In the DSC curves only the actin peak was still visible. All other proteins were obviously denatured during the hot smoking. When DSC curves were taken from smoked trout after different durations of chilled storage it could be seen that the denaturation temperature of actin decreased almost linearly with progression of storage time.

Einfluss der Verarbeitung auf lipophile chlororganische Rückstände in Fischen

Influence of fish processing methods on changes of chlordane and toxaphene residue concentrations were studied in various fishery products. Investigation included smoking, marinating and canning of fish. Smoking of Greenland halibut and ocean perch led to an increase in chlordane and toxaphene residue amounts in the edible part in relation to the raw material. A similar increase was observed during the marinating process of herring fillets. In both cases, loss of water was responsible for the observed changes in residue contents. The fat and thus the lipophilic organochlorine compounds remained completely in the products. Canning of herring fillets in tomato sauce reduced the residue concentration of the final product due to dilution by the tomato sauce. The concentrations in the fillets kept nearly unchanged even after storage of cans for six months. No equilibration was observed between residue concentrations in fillets and sauce.

Present status and potentials of inshore and offshore pelagic fisheries in the capture and processing industries of Nigeria

Apart from activities of some foreign-based vessels, commercial exploitation of pelagic fishery resources in Nigeria has been limited to inland and inshore waters. Estimated potential for the inshore pelagic fishery is 70,000-90,000 tonnes while the small pelagic resources in the near offshore as well as tuna and tuna-like fishes further offshore have potentials of about 10,000 metric tonnes each. Despite the abundance of tuna within and adjoining the Nigerian EEZ, and its importance in the international market, only foreign-flagged vessels take advantage. In addition, the inshore pelagic fisheries in Nigeria have for long remained underexploited. The most common processing method has remained the age-old traditional smoke-drying, which is inadequate resulting in colossal waste through denaturation and incessant infestations by insects and moulds among other causes. The use of modern smoking techniques coupled with effective distribution systems can undoubtedly reduce waste. However, these are often not within the reach of most artisanal processors. It is proposed that the organised private sector should invest on simple but proven processing equipment such as smoking kilns. The inshore pelagic fish species and other small fishes can sustain cottage canning industries sited in fishing villages/settlements while larger canning factories should be based on offshore resources. Modalities for successful investments are highlighted, while a major consideration is given to joint ventures

Improved fisheries technologies and approaches for their dissemination: a case study of Niger State

Technology generation and dissemination are important components of rural transformation programmes. Nigerian fisheries sub-sector is still hampered by low productivity (especially in aquaculture) and low output (capture fisheries and post-harvest technologies). Research institutions and the Universities have made efforts in developing improved technologies to find solution to these problems, yet the level of adoption of the technologies remain low. This is due to a combination of various factors among which are faulty agricultural policies; institutional framework and unfavourable socio-economic environment. Niger State plays an important role in production in Nigeria and host the only research institute with the mandate in inland fisheries. It is important therefore to know the effectiveness of various extension approaches used in disseminating the technologies developed and their impact on adopters. Forty fishers were randomly selected in Shiroro L.G.A. of the Niger State and interviewed. The study probed into their socio-economic characteristics, traditional practices, extent of awareness and adoption for fisheries technologies and the effectiveness and impact of various approaches used by the extension organizations to disseminate the technologies. The results show that the economically active age group of the fishers was in the range of 20-50 years (87.5%). Males (95%) dominate the fisher population. 47.5% of the respondents have average household size of 6-10 and 57.5% were below primary school in educational attainment. Only 57.5% belonged to cooperative societies, while 90.0% of the fishers have no access to credit other than personal finance. Majority of fish-farmers (60%) operate at homestead level with pond size less than 50 square meter, stock under polyculture fishing methods are at subsistence level, while 67.5% of processors use mud-oven to cure, by smoking, freshly caught fish. Disseminated aquaculture technologies have low level of awareness (5-20%) and adoption (2.5-22.5%). For capture fisheries and post-harvest technologies awareness levels of 47.5-72.5% and adoption levels of 27.5-50.0% were recorded. Method demonstration (87.5%), result demonstration (75.0%) and field days (47.5%) are the major approaches used by the ADP. Respondents were of the opinion that method demonstration (65%), result demonstration (57.5%) and field day (30.0%) are effective. 62.5% of respondents had enhanced income due impact of extension activities

Sustainability of indigenous technology in postharvest fisheries operations in Edo and Delta states, Nigeria

The study examined the sustainability of various indigenous technologies in post-harvest fishery operation in Edo and Delta States (Nigeria). A total of seventy processors were interviewed during the survey through a random selection. The data obtained were analysed by descriptive statistics. The results obtained revealed that the majority of the fish processors within the study areas were married with women who were not educated beyond the first Leaving School Certificate. Most of the fish processed were bought fresh, while the commonest method of preservation/processing practiced was smoking. The type of processing equipment used was the Chorkor smoking kiln and the drum smoker while the commonest source of energy is firewood. The processing activities within the communities were found to be profitable. However it was observed that due to the high cost of processing materials and equipment, the economic growth and the living standard is quite low. Some recommendations were made to improve the traditional method of fish preservation and processing

Involvement of fishermen children in fishing activities in Lake Chad region

Five fishing villages in Lake Chad Basin region of Borno State (Nigeria) were assessed for the roles of children in fishing activities in the area. The villages surveyed include: Bundaram, Yobe, Daba masara, Dumba and Doro. The results show that the children were largely between 12-18 years of age in the villages. Generally, the younger children (less than 12 years) participate in activities that require no technicality and little physical strength, while the older children (12 years and above) engage in skillful fabrication of gear and fishing activities. Some activities in the surveyed villages were gender specific. Such activities include fish processing (smoking) which is exclusive for female and few male children, who carry out preliminary cleaning of fish before any processing method is applied. 80% of the children in the five fishing villages claimed proper understanding of the techniques and procedure involved in most fishing activities. About 65% of the children sampled showed willingness to become full time fishermen while 22% were uncertain and claimed that they do not know what the future holds for them. 15% of them resolved to migrate to town so that they could live a city life

Assessment of post-harvest losses in Nigeria fishery: the Kainji Lake model

The paper provides a description of a methodology used for quantitative assessment of post harvest losses in the Kainji Lake Fishery (Nigeria). The sample population was made up of 314 fisherfolk, 115 processors, 125 fish buyers and 111 fish sellers. For the determination of handling losses, 24,839 fishes weighing 2,389.31 kg belonging to 43 species were examined of which 10% by number and 9% by weight deteriorated at checking and 4% by number and 3% by weight at landing. Processing losses recorded 22% by number and 16% by weight deteriorated prior to and during smoking with the traditional 'Banda' kiln. During marketing, 16% of fish sold had deteriorated and 6% by weight of fish bought also deteriorated, mainly due to insect infestation during storage. Based on the 1995 yield estimate for Kainji Lake fishery, approximately 1000 tons of fish estimated at 80 million Naira were lost during handling alone. This figure would be much higher if the level of losses during processing and marketing are included. This assessment technique is recommended for use in obtaining quantifiable data on post harvest losses from other water bodies in Nigeria